Digby is Done!
- Paul Charland
- Charter Member
- Posts: 734
- Joined: Tue Apr 29, 2008 10:22 am
- Location: Brockville, ON
Digby is Done!
Hi All,
After four months and over 800 buildings, I'm finally finished Digby.
I've taken a few screenshots and I. hoping this works... Photobucket does not appear to be working and from what I've read.
Southbound Train 1 enters Digby at the at the north end of 1st Avenue.
The train is seen along the shore of the Annapolis Basin with the Digby wharf in the background.
Train crosses Montague Row.
Just before 1 PM each day Trains 1 and 2 meet in Digby.
After a brief stop in Digby, Train 1 continues south crossing the south end of 1st Avenue.
Train 26 crosses Victoria Street.
8135 leaves it's train in the yard and heads to lift a car at Petrofina.
The crew lifts an empty tankcar and heads back to the south end of Digby.
8135 crosses Sydney Street, in the background you can see Digby's War Memorial.
... to be continued... maximum of ten attachments.
After four months and over 800 buildings, I'm finally finished Digby.
I've taken a few screenshots and I. hoping this works... Photobucket does not appear to be working and from what I've read.
Southbound Train 1 enters Digby at the at the north end of 1st Avenue.
The train is seen along the shore of the Annapolis Basin with the Digby wharf in the background.
Train crosses Montague Row.
Just before 1 PM each day Trains 1 and 2 meet in Digby.
After a brief stop in Digby, Train 1 continues south crossing the south end of 1st Avenue.
Train 26 crosses Victoria Street.
8135 leaves it's train in the yard and heads to lift a car at Petrofina.
The crew lifts an empty tankcar and heads back to the south end of Digby.
8135 crosses Sydney Street, in the background you can see Digby's War Memorial.
... to be continued... maximum of ten attachments.
- Paul Charland
- Charter Member
- Posts: 734
- Joined: Tue Apr 29, 2008 10:22 am
- Location: Brockville, ON
Re: Digby is Done!
After lifting another empty tankcar from Imperial Esso, the crew with return to the yard and lift an empty insulated boxcar from Atlantic Wholesalers before making up their train.
The tracks cross 1st Avenue then run along it for two blocks before crossing it again.
Train 26 crosses Montague Row while heading out of Digby.
Paul
The tracks cross 1st Avenue then run along it for two blocks before crossing it again.
Train 26 crosses Montague Row while heading out of Digby.
Paul

-
- Charter Member
- Posts: 329
- Joined: Sat Feb 04, 2012 10:14 pm
- Location: Halifax
Re: Digby is Done!
Looks good, I got your email to download to test it out which I'll hopefully do tomorrow!
Cheers
Cheers
_________________
Samuel M Clark
Halifax, Nova Scotia
Samuel M Clark
Halifax, Nova Scotia
- Dan Conlin
- Charter Member
- Posts: 449
- Joined: Mon Aug 04, 2008 6:12 pm
Re: Digby is Done!
Well done Paul. The views really have a Digby feel, especially the bits I know around the station. Congrats. Dan
- Paul Charland
- Charter Member
- Posts: 734
- Joined: Tue Apr 29, 2008 10:22 am
- Location: Brockville, ON
Re: Digby is Done!
Turned out well... anything along the DAR is worth doing properly.
Paul
Paul

- stem
- Site Admin
- Posts: 1415
- Joined: Tue Oct 16, 2007 7:19 pm
- Location: St. Albert, Alberta
- Contact:
Re: Digby is Done!
That turned out to be a LOT of work. More than you probably originally thought I'm thinking but the results are terrific. Between all the bridges and structures getting there and Cornwallis to boot, you've done a spectacular job of extending the DAR this version and really capturing the feel of the Annapolis - Digby stretch!!
Steve Meredith
DAR DPI Webmaster and Forum Sysop
DAR DPI Webmaster and Forum Sysop
- Paul Charland
- Charter Member
- Posts: 734
- Joined: Tue Apr 29, 2008 10:22 am
- Location: Brockville, ON
Re: Digby is Done!
Hi Steve,
I actually hit this one on the head for timing. I put a beta out on the 27th of February that ended just outside Digby and said Digby would probably take four months... I finished it and put out the next beta on July 1st.
Just starting the bridge at Weymouth today. Most of this is already drawn in the form of the bridges at Bear River and Clementsport... just have to copy and paste things in the right order and build the curve portion.
Paul
I actually hit this one on the head for timing. I put a beta out on the 27th of February that ended just outside Digby and said Digby would probably take four months... I finished it and put out the next beta on July 1st.
Just starting the bridge at Weymouth today. Most of this is already drawn in the form of the bridges at Bear River and Clementsport... just have to copy and paste things in the right order and build the curve portion.
Paul

- stem
- Site Admin
- Posts: 1415
- Joined: Tue Oct 16, 2007 7:19 pm
- Location: St. Albert, Alberta
- Contact:
Re: Digby is Done!
Wait a minute.. I thought you weren't going to Yarmouth? !!
This will be very cool!
This will be very cool!
Steve Meredith
DAR DPI Webmaster and Forum Sysop
DAR DPI Webmaster and Forum Sysop
- Paul Charland
- Charter Member
- Posts: 734
- Joined: Tue Apr 29, 2008 10:22 am
- Location: Brockville, ON
Re: Digby is Done!
Hi Steve,
I guess you missed my revised game plan from a few months ago! I've had the tracks laid for the Yarmouth Sub for a few months now. Yesterday I draw the bridge at Weymouth, today I have to divide it up into 13 or 14 parts and reassemble it in the sim... came out to be 19,835 polygons! After the Yarmouth Sub I will most likely do the Truro Sub to complete the DAR as it was in the mid-70s.
I really would like to model the M-107 and a few steam engines, and that would probably lead to creating an early 1940s Kingsport and Weston branch route just to "complete" the DAR.
Paul
I guess you missed my revised game plan from a few months ago! I've had the tracks laid for the Yarmouth Sub for a few months now. Yesterday I draw the bridge at Weymouth, today I have to divide it up into 13 or 14 parts and reassemble it in the sim... came out to be 19,835 polygons! After the Yarmouth Sub I will most likely do the Truro Sub to complete the DAR as it was in the mid-70s.
I really would like to model the M-107 and a few steam engines, and that would probably lead to creating an early 1940s Kingsport and Weston branch route just to "complete" the DAR.
Paul

- stem
- Site Admin
- Posts: 1415
- Joined: Tue Oct 16, 2007 7:19 pm
- Location: St. Albert, Alberta
- Contact:
Re: Digby is Done!
I'm thrilled to hear it. I'm especially looking forward to seeing the bridges and Yarmouth!
You know we have some good resources for Yarmouth. Not so much for in between unfortunately. A very poorly photographed area of the DAR.
There's the Yarmouth railyard blueprints: http://www.dardpi.ca/wiki/index.php?tit ... _Blueprint
among a lot of photos.
I just recently "found" the MP330s on the CP Tracks site too. These are full of folios for all locomotives. The 1945 will give you all the steam and the 1971 or 1972 will give you all diesel.
http://www.dardpi.ca/wiki/index.php?tit ... ocomotives
You know we have some good resources for Yarmouth. Not so much for in between unfortunately. A very poorly photographed area of the DAR.
There's the Yarmouth railyard blueprints: http://www.dardpi.ca/wiki/index.php?tit ... _Blueprint
among a lot of photos.
I just recently "found" the MP330s on the CP Tracks site too. These are full of folios for all locomotives. The 1945 will give you all the steam and the 1971 or 1972 will give you all diesel.
http://www.dardpi.ca/wiki/index.php?tit ... ocomotives
Steve Meredith
DAR DPI Webmaster and Forum Sysop
DAR DPI Webmaster and Forum Sysop
- Paul Charland
- Charter Member
- Posts: 734
- Joined: Tue Apr 29, 2008 10:22 am
- Location: Brockville, ON
Re: Digby is Done!
Hi Steve,
Yes, the only thing I have to go by for a lot of places is just going to the crossing in Google Earth and looking around, really helps that most of the small sto9ps are actually out of town. I did use the blueprint in the library for Yarmouth, plus the aerial shot from 1971 helped. I have nothing there aside from the track and one road.
Just finished placing the bridge in Weymouth this morning, had to divide it into 11 parts to get it into the sim.
Must have done something right, it can handle an RDC!
There is little traffic on the two branches so I was thinking if it was back during the war there would be at least the odd extra running to and from Aldershot. I also want to do a couple of locomotives in the "maroon" paint scheme... I sort of like it with the yellow lettering and herald. I know they were being repainted to place because of the war but I'm thinking that didn't happen on the first day of the war so there might be one or two that made it to 1940ish.
Paul
Yes, the only thing I have to go by for a lot of places is just going to the crossing in Google Earth and looking around, really helps that most of the small sto9ps are actually out of town. I did use the blueprint in the library for Yarmouth, plus the aerial shot from 1971 helped. I have nothing there aside from the track and one road.
Just finished placing the bridge in Weymouth this morning, had to divide it into 11 parts to get it into the sim.
Must have done something right, it can handle an RDC!
There is little traffic on the two branches so I was thinking if it was back during the war there would be at least the odd extra running to and from Aldershot. I also want to do a couple of locomotives in the "maroon" paint scheme... I sort of like it with the yellow lettering and herald. I know they were being repainted to place because of the war but I'm thinking that didn't happen on the first day of the war so there might be one or two that made it to 1940ish.
Paul
