Dominion Atlantic Railway Digital Preservation Initiative - Wiki

Use of this site is subject to our Terms & Conditions.

Kentville Roundhouse

From DARwiki
Revision as of 23:23, 17 November 2018 by Dan conlin (talk | contribs) (→‎Gallery: image)

Kentville Roundhouse

Located at the west end of the Kentville Railyard, the Kentville roundhouse had ten stalls and a 70 foot turntable. It was attached by a short passageway to the Kentville Machine Shop.

Roundhouse stalls were numbered from south to north, starting with Stall No. 1 closest to the mainline and ending with Stall No. 10 near the Cornwallis River.[1] Stalls Nos. 5 to 10 had a three foot extension built on to the doors to accommodate the longer Pacific locomotives.

Dimensions were:

  • South wall: 80' 6"
  • North wall: 83' 7"
  • Rear (west) wall of each stall: 27' 5" wide
  • Doors: Four south doors, 13' 4" wide, Six North Doors 13' wide. Doors separated by 10" posts[2]

Chronology

1916 - the DAR constructs a 5-stall roundhouse at the west end of the Kentville yard where DAR subsidiary the Cornwallis Valley Railway branches off for Kingsport.

1926 - CPR expands its subsidiary's roundhouse in Kentville, adding 5 additional stalls.[3]

1936 - Stalls 5 to 10 extended to accommodate arrival of Pacific locomotives.[4]

1961 - Canadian Pacific Railway stops using the roundhouse for locomotive maintenance.

2007 - The roundhouse is demolished, July 9 to 13.

Gallery

References and Footnotes

  1. Stall numbers are shown in Harold Jenkins 1927 photo and Canada Science and Technology 1943 photo of Locomotive 2511 (STR08416a).
  2. Dimensions based on onsite measurements by Dan Conlin and Leon Barron and a 1980 drainage plan of the Canada Foods plant from Graves Ltd.
  3. The expansion was announced in the Kentville Advertiser April 1, 1926
  4. "Railway Notes", Kentville Advertiser, Oct. 15, 1936

External Links