Dominion Atlantic Railway Digital Preservation Initiative - Wiki

Use of this site is subject to our Terms & Conditions.

Difference between revisions of "Kentville Roundhouse"

From DARwiki
(→‎Gallery: image)
Line 3: Line 3:
  
 
Roundhouse stalls were numbered from south to north, starting with Stall No. 1 closest to the mainline and ending with Stall No. 10 near the Cornwallis River.<ref>Stall numbers are shown in Harold Jenkins 1927 photo and Canada Science and Technology 1943 photo of Locomotive 2511 (STR08416a).</ref> Stalls Nos. 5 to 10 had a three foot extension built on to the doors to accommodate the longer Pacific locomotives.  
 
Roundhouse stalls were numbered from south to north, starting with Stall No. 1 closest to the mainline and ending with Stall No. 10 near the Cornwallis River.<ref>Stall numbers are shown in Harold Jenkins 1927 photo and Canada Science and Technology 1943 photo of Locomotive 2511 (STR08416a).</ref> Stalls Nos. 5 to 10 had a three foot extension built on to the doors to accommodate the longer Pacific locomotives.  
 +
 +
The Turntable was air-powered by the locomotive riding on it.  The air motor was under the control platform, and connected to the airhose of the engine by a normal glad hand.  The engine was moved so that the there was some weight on the air motor's wheels, and then the air cock was cracked.  The air motor chuffed loudly, slipping and sliding, but eventually doing its job.
  
 
Dimensions were:
 
Dimensions were:

Revision as of 18:45, 27 November 2018

Kentville Roundhouse

Located at the west end of the Kentville Railyard, the Kentville roundhouse had ten stalls and a 70 foot turntable. It was attached by a short passageway to the Kentville Machine Shop.

Roundhouse stalls were numbered from south to north, starting with Stall No. 1 closest to the mainline and ending with Stall No. 10 near the Cornwallis River.[1] Stalls Nos. 5 to 10 had a three foot extension built on to the doors to accommodate the longer Pacific locomotives.

The Turntable was air-powered by the locomotive riding on it. The air motor was under the control platform, and connected to the airhose of the engine by a normal glad hand. The engine was moved so that the there was some weight on the air motor's wheels, and then the air cock was cracked. The air motor chuffed loudly, slipping and sliding, but eventually doing its job.

Dimensions were:

  • South wall: 80' 6"
  • North wall: 83' 7"
  • Rear (west) wall of each stall: 27' 5" wide
  • Doors: Four south doors, 13' 4" wide, Six North Doors 13' wide. Doors separated by 10" posts[2]

Chronology

1916 - the DAR constructs a 5-stall roundhouse at the west end of the Kentville yard where DAR subsidiary the Cornwallis Valley Railway branches off for Kingsport.

1926 - CPR expands its subsidiary's roundhouse in Kentville, adding 5 additional stalls.[3]

1936 - Stalls 5 to 10 extended to accommodate arrival of Pacific locomotives.[4]

1961 - Canadian Pacific Railway stops using the roundhouse for locomotive maintenance.

2007 - The roundhouse is demolished, July 9 to 13.

Gallery

References and Footnotes

  1. Stall numbers are shown in Harold Jenkins 1927 photo and Canada Science and Technology 1943 photo of Locomotive 2511 (STR08416a).
  2. Dimensions based on onsite measurements by Dan Conlin and Leon Barron and a 1980 drainage plan of the Canada Foods plant from Graves Ltd.
  3. The expansion was announced in the Kentville Advertiser April 1, 1926
  4. "Railway Notes", Kentville Advertiser, Oct. 15, 1936

External Links