Dominion Atlantic Railway Digital Preservation Initiative - Wiki

Use of this site is subject to our Terms & Conditions.

Kentville Railyard

From DARwiki
Revision as of 13:43, 5 August 2017 by Dan conlin (talk | contribs)

Kentville Railyard

The shunting yards in Kentville were located south of the the roundhouse and machine shop. The yard consisted of four shunting sidings to the north of DAR the mainline, North 1, North 2, North 3 and North 4 and four shunting spur located to the south of the mainline, South 1, South 2, South 3 and South 4. The shunting yard also contained the Kentville Track Scale. A siding and lead track connected the various yard tracks.

North of the


D.A.R. railyard in Kentville.
D.A.R. railyard in Kentville.
D.A.R. railyard in Kentville.
D.A.R. railyard in Kentville on June 21, 1987.
Kentville including D.A.R. railyard.
D.A.R. railyard in Kentville, 1974. This drawing is difficult to read but is proportionately correct and was scanned at 200 DPI. The images below although not proportionally correct because they appeared photographed, not scanned, are the same map in sections and very readable with additional notes to explain some of the original notations on the map. The two buildings immediatley east of the roundhouse are the machine shop and blacksmith shop.

Railyard in sections

The above drawing is difficult to read but is proportionately correct and was scanned at 200 DPI. These images although not proportionally correct because they appeared photographed, not scanned, are the same map as above in sections and very readable with additional notes to explain some of the original notations on the map.

These images are just begging to be put on CAD. If anyone can help this way or advise what the proper way to set up a CAD file for land mapping is so others can do the tracing, please let us know. See this message thread on our forum: http://dardpi.ca/Forum/viewtopic.php?f=3&t=18#p49


External Links